Cary-audio-design SLP 03 User Manual download pdf (Page 12)

CONTROLS AND DISPLAYS

6. BALANCED MAIN OUTPUTS

• If your power amplifier is equipped with balanced inputs, it is generally best to use the

balanced outputs on your preamplifier. A balanced signal from preamplifier to power

amplifier will offer the highest possible performance with the best immunity from

common-mode noise, such as radio frequency interference (RFI). The balanced output

signal is made available by way of precision male XLR connectors (requiring female

XLRs on the preamplifier end of the interconnecting cable).

• The pin assignments of these XLR-type male outputs are:

Pin 1: Signal ground

Pin 2: Signal + (non-inverting)

Pin 3: Signal - (inverting)

Connector ground lug: chassis ground

Refer to your power amplifier's operating manual to verify that the pin assignments of

its input connectors correspond to the SLP 03. If not, wire the cable so that the

appropriate output pin connects to the equivalent input pin.

7. DC TRIGGER OUTPUT TERMINALS

• Connect a device that needs to be triggered by DC + 12V. (CD player)

8. POWER INPUT (AC IN)

• Connect to an AC power supply using the included power supply cord.

9. IR INPUT JACK

• Use this jack to connect external IR sensors.

10. RS-232 PORT

• The RS-232 port is used in conjunction with an external controller to control the

operation of the SLP 03. (This is for custom installation use. Consult your dealer for

more information.)

1 2 ... 7 8 9 10 11 12 13 14 15 16

No comments

Cary-audio-design SLP 03 User Manual Page 12