CHANGING THE DEFAULT SETTINGS
22
The DVD 8 will automatically set the digital to analog converter (DAC) sample rate to match the
data rate of any CD, DVD-Audio or DVD disk it is playing (48, 96, 192 kHz) when you have the
audio turned ON for the HDMI section. If you wish to control the sample rate manually you need
to first set the HDMI audio to OFF. Then the LPCM setting will be highlighted and it will become
adjustable for the analog outputs sample rate.
If you intend to use HDMI with the DVD movie soundtrack audio going along with the video to a
display or surround sound processor then this LPCM setting will not be available.
...........................................................................................................................................................................
PRO LOGIC II
Use this to configure the Dolby Pro Logic II function. Dolby Pro Logic II technology can expand
2-channel source audio into full 5-channel surround sound.
• Pro Logic II is effective only when down-mix is set to 5.1ch and SPDIF output is set to Raw.
• Press the SELECT button to enter the Pro Logic II setup page.
• Press the LEFT ARROW button to exit the Pro Logic II setup page.
A. Pro Logic II: To turn on or off the Pro Logic II processing. The options are:
• On – Pro Logic II processing is always on
• Off (default) – No Pro Logic II processing
• Auto – Pro Logic II processing is on only when Dolby Pro Logic II encoded content is
detected.
B. Mode: To set the processing mode of Pro Logic II. The options are:
• Music – Sound from all speakers arrive at the same time with no delay
• Movie – 10ms delay is added to the surround channels
• Pro Logic – Earlier version of Dolby Pro Logic processing
• Auto – Automatically selects processing mode based on content
C. Panorama: To turn on/off panorama mode. When turned on, front stereo audio is
extended to the surround channels for an enveloping effect.
D. Dimension: To increase or decrease the dimensional effect by adjusting the front to rear
balance. As the size number increases, the sound localization moves from the rear toward
the front of the room.
E. Center Width: To control the width of the center channel sound effect by blending the
center speaker to the left and right speakers. As the level number increases, the center
channel sound moves toward the left and right speakers.
...........................................................................................................................................................................
DOLBY DIGITAL SETUP
Use this to configure the Dolby Digital decoder.
• Press the SELECT button to enter the Dolby Digital Setup page.
• Press the LEFT ARROW button to exit the Dolby Digital Setup page.
A. Dual Mono: To choose the output for Dolby Digital discs encoded with two independent
audio channels, such as bilingual programs. The options are:
• Stereo (default) – Stereo output
(36 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals